Elation - Flex LED Tape - Thin And Flexible LED Circuit Strip
ELATION FLEXLED TAPE is a very thin and flexible LED circuit strip that can be cut every 2" and put back together using simple soldering techniques. It comes available in RGB and Single Color versions. High output, low heat and easy installation makes this product idea for a variety of applications.
It's called tape because the back of the strip uses 3M adhesive glue to tape the LED strip anywhere you need it. It has been prefabricated in a 10 FT spool (RGB ver) with 60 x 2" black circuit strips holding 3 SMD chips each for a total of 180, 120D SMD LED chips with total power consumption of 43 watts(max. 3pcs with 4A PSU & 10pcs in line with 12A PSU). Power supplies offered are UL and CSA approved.
The single color spools are 20FT in length with 360 SMD single color LED on white flexible circuit strip with the same spacing but direct wire 12v from any standard 12v DC power supply with a total of 86 watts per spool (max 1pcs with 4A PSU & max 5pcs in line with 12A PSU).
FLEX RGB TAPE has an optional infrared wireless controller to change colors, select 16 static colors or run color fades or color snap programs. You can use the signal amplifier if there is more than 10 pcs in one system or if you want to synchronize multiple zones. Using an Acclaim X-Driver 4 - 12V with built in driver & psu you can have DMX control for up to 16.7 million color choices. FLEXLED TAPE Also Has 3M adhesive backing for easy installation
Copyright 2014 PhantomDynamics.com. All rights reserved.